> Best suited for small components and micro bgas. > Copper plate closed for small drill vias (for conductive…
With a mask plugged via, (Mask Filled or Non-Conductive Filled via), specific measures are taken to ensure the via is plugged and sealed with…
Via tenting is the easiest and least costly process—actually there is no added cost for this process. Simply remove the mask clearances from the…
HDI PCBs is the latest technologies available to increase the functionality of PCBs using the same or less amount of area. This advanced PCB…
The benefits of via-in-pad designs are well documented. From reduction of inductance to increased density, via-in-pad has become an essential tool for designers when…
Anyone in the printed circuit board (PCB) industry understand that PCB’s have copper finishes on their surface. If they are left unprotected then the…
Plated half holes are mainly used for board-on-board connections, mostly where two printed circuit boards with different technologies are combined. E.g. the combination of…
As we have mentioned before: All Printed Circuit Boards (PCB’s) have copper finishes on their surface. If they are left unprotected then the copper…
If you are having PCBs produced for the first time, you would have many doubts to choose the substrate material, fire rating,…
All Printed Circuit Boards (PCB’s) have copper finishes on their surface. If they are left unprotected then the copper will oxidize and deteriorate, there…
PCB’s must have a break off area to allow for conveyor machines throughout the factory. Break off width must be a minimum of 10mm…
The materials used to make PCBs are very important. Because the costs of different materials can vary from 10% to 100%, so the price…
